Levil Aviation4.3 - App Store

The new Levil Aviation App is a customizable digital instrument panel that aims to breach the gap between emerging wireless avionics and limited compatibility with Advanced Navigation Apps. Display information from wireless devices such as iLevil3, B.O.M or other GDL90 devices, simultaneously, while using your preferred navigation app.

The Levil Aviation App utilizes iOS multi-tasking features to work side-by-side, full screen, or slide-over, where modules can be shown on top of your navigation app of choice. The current version includes interfaces for traffic avoidance, engine monitoring, EFIS, angle of
attack monitoring, autopilot interface, and much more.

Version History Levil Connect Integration - Seamless flight transfer services for flight schools.
SFS Integration - Beta: Realtime Tracking of flight. 4.3 12/31/2025 Radio COM interface and new Wireless AP Interface 4.1 07/21/2025 - Full 3-axis Autopilot Interface.
- Bug fixes on EFIS not showing AP status. 3.9 12/21/2024 -Enhanced Autopilot tracking when using LEVEL button
-Fixed rounding error when reading HDG value
-Fixed "Done" button on the Device Config View not working when in 3 window layout
-Fixed Altitude and Airspeed Labels truncating when in double SplitScreen mode
-Removed Vspeeds from Analog Gauge when using GPS altitude as source
-Removed Vspeeds from EFIS View when using GPS altitude as source
-Added Speed Source name to the Analog gage to distinguish between "GS" and "IAS"
-Added Ability to program Astroplus to receive Air data from SuperEco AP
-Changed H Meter to Hobbs
-Added Local network settings link
-Increased font for altimeter setting
-New wireless autopilot pairing functions
-Added Voltage warning message on ADS-B screen when ADS-B is not ON
-RPM gauge interface disables minimum gauge limit to be set to anything other than 0 3.8 10/05/2024 - Fixed bug for OAT when using GRT 2000, and 4000
- Removed Yaw Damping functions for AP firmware versions that do not support Yaw Damping. 3.6 05/17/2024 1. Engine feature requests:
- Ability to change from F to Celcius on OAT gauge
- Ability to use Fuel Left and Right Gauges to display Fuel Total
2. Added compatibility with new LevilPulse devices
3. Added Network Status
4. Added setup and interface for new Yaw axis for autopilot
5. Added interface for new wireless autopilot status
6. Added interface for Neutral Trim on autoPilot Interface 3.5 03/29/2024 - Enhanced altimeter setting synchronization when using the Analog Altitude View
- Added Vertical power Integration
- Increased CHT and EGT fonts
- Restricted App use for iOS 13 and up 3.3 10/31/2023 - Adds IAS information on AOA view
- Added an altimeter setting button on Autopilot View
- Added background layer on AOA gauge on EFIS view for better visibility
- Fixed bug on device configuration menu 3.2 08/17/2023 - Added G meter information to the EFIS view
- Added slip indicator and turn coordinator to iPhone's EFIS View (full screen)
- Enhanced wireless flight-log retrieval from BOM and Levil (requires firmware update)
- Added easy to reach "Clear AOA Calibration" button to the Device Configuration page
- Fixed bug when configuring Auxiliary ports for Levil AW and Levil AP
- Eliminated the NAV status bar on the EFIS view when not using Autopilot capabilities
- Altimeter setting font made bigger on iPhone 3.0 03/25/2023 - Added a Lock button interface to prevent screens from expanding/zooming in when button is locked.
- Traffic View now has 2NM range in addition to previous ranges (1NM, 5NM, 10NM, 20NM, 40NM)
- Fixed bug on Autopilot Interface that was resetting the horizon and AP values. 2.8 12/18/2022 - Compatibility with the new Astro+
- Enhanced user interface for adjusting altimeter setting
- Corrected bug when using Millibars to control Autopilot 2.7 12/05/2022 - Ability to change communication ports for Avidyne compatibility 2.6 10/15/2022 - Fixed Bug when using Trim window with iLevil Autopilot with Firmware 8.1 and older
- Added ability to configure Neutral Position of servos for the autopilot
- Added ability to quickly reset Trim to Neutral
- Added ability to reset the Airspeed offset calibration 2.5 09/09/2022 - Added new interface for Autopilot trim
- Bigger fonts on CHT and EGT gauges
- Added warning message when Fuel gauges are low
- Disables AOA calibration when aircraft is grounded
- Enabled a light aircraft category on the traffic view with different icon
- Enabled custom filtering of traffic within an altitude range
- Added support to configure communication port for Avydine products 2.4 07/12/2022 Added Integration for our new Panel Mounted Autopilot Control
Bug fixes:
- App crashes when invalid altimeter setting inputs were used
- Helicopters not showing properly on the traffic view
- Added transparency to traffic Altitude labels when a warning is activated 2.2 02/25/2022 Improved user interface for iLevil Autopilot Calibration. 2.1 09/02/2021 AutoPilot Integration. Enjoy all the features of the new iLevil AP (trim-tab based autopilot). Trim, level and Navigate using your Smart phone or tablet. 2.0 08/11/2021 Some improvements in this release:
- Bigger fonts on ADS-B traffic radar
- Ability to configure Fuel gauges and MAP
- VSI bug fixed when switching between meter/sec and feet/min
- Flyte Analytics Integration
- Lots of improvements on Auto-flight uploads to Wyvern
- Bigger Vspeeds bands on the airspeed indicator
- Ability to zoom up to 1 NM on ADS-B traffic radar
- Other minor improvements

We want to hear from you! Try it and let us know how it works by rating the App on the App store. 1.3 03/10/2021 - Added new interface for AeroPath Radio's link.
- Added compatibility with our legacy product AHRS-G-mini
- Fixed bug when displaying airspeed in MPH.
- Fixed bug when updating altimeter setting from the analog view. 1.2 12/09/2020 This is the first Beta release. Compatible with iOS9 and up. Download, and give us your honest feedback, we will be updating the App as we get your reports.
Updates:
- Fixed shutdown extended timer for BOM
- Performance optimizations
- Fixed Keyboard dismissal bug on iPhone
- fixed speed calibration for BOM
- Added status view for auto-retrieval of files for Wyvern. 1.1 11/17/2020 1.0 11/10/2020